Stoichiometry

Stoichiometry ( /ˌstɔɪkiˈɒmɨtri/) is a branch of chemistry that deals with the relative quantities of reactants and products in chemical reactions. In a balanced chemical reaction, the relations among quantities of reactants and products typically form a ratio of whole numbers. For example, in a reaction that forms ammonia (NH₃), exactly one molecule of nitrogen (N₂) reacts with three molecules of hydrogen (H₂) to produce two molecules of NH₃:

N₂ + 3H₂ → 2NH₃

Stoichiometry can be used to calculate quantities such as the amount of products (in mass, moles, volume, etc.) that can be produced with given reactants and percent yield (the percentage of the given reactant that is made into the product). Stoichiometry calculations can predict how elements and components diluted in a standard solution react in experimental conditions. Stoichiometry is founded on the law of conservation of mass: the mass of the reactants equals the mass of the products.

Reaction stoichiometry describes the quantitative relationships among substances as they participate in chemical reactions. In the example above, reaction stoichiometry describes the 1:3:2 ratio of molecules of nitrogen, hydrogen, and ammonia.

Composition stoichiometry describes the quantitative (mass) relationships among elements in compounds. For example, composition stoichiometry describes the nitrogen to hydrogen ratio in the compound ammonia: 1 mol of ammonia consists of 1 mol of nitrogen and 3 mol of hydrogen. As the nitrogen atom is about 14 times heavier than the hydrogen atom, the mass ratio is 14:3, thus 1 kg of ammonia contains 176 g of hydrogen.

A stoichiometric amount or stoichiometric ratio of a reagent is the optimum amount or ratio where, assuming that the reaction proceeds to completion:

all reagent is consumed
there is no shortfall of reagent
no residues remain.

A non-stoichiometric mixture, where reactions have gone to completion, will have only the limiting reagent consumed completely.

While almost all reactions have integer-ratio stoichiometry in amount of matter units (moles, number of particles), some nonstoichiometric compounds are known that cannot be represented by a ratio of well-defined natural numbers. These materials therefore violate the law of definite proportions that forms the basis of stoichiometry along with the law of multiple proportions.

Gas stoichiometry deals with reactions involving gases, where the gases are at a known temperature, pressure, and volume, and can be assumed to be ideal gases. For gases, the volume ratio is ideally the same by the ideal gas law, but the mass ratio of a single reaction has to be calculated from the molecular masses of the reactants and products. In practice, due to the existence of isotopes, molar masses are used instead when calculating the mass ratio.

1 Etymology
2 Definition
3 Different stoichiometries in competing reactions
4 Stoichiometric coefficient
5 Stoichiometry matrix
6 Gas stoichiometry
7 Stoichiometric air-fuel ratios of common fuels
8 References
9 External links

Etymology

The term stoichiometry is derived from the Greek words στοιχεῖον stoicheion "element" and μέτρον metron "measure". In patristic Greek, the word Stoichiometria was used by Nicephorus to refer to the number of line counts of the canonical New Testament and some of the Apocrypha.

Definition

Stoichiometry rests upon the very basic laws that help to understand it better, i.e., law of conservation of mass, the law of definite proportions (i.e., the law of constant composition) and the law of multiple proportions. In general, chemical reactions combine in definite ratios of chemicals. Since chemical reactions can neither create nor destroy matter, nor transmute one element into another, the amount of each element must be the same throughout the overall reaction. For example, the amount of element X on the reactant side must equal the amount of element X on the product side.

Stoichiometry is often used to balance chemical equations (reaction stoichiometry). For example, the two diatomic gases, hydrogen and oxygen, can combine to form a liquid, water, in an exothermic reaction, as described by the following equation:

$\mathrm{2H_2 %2B O_2 \rightarrow 2H_2O}$

Reaction stoichiometry describes the 2:1:2 ratio of hydrogen, oxygen, and water molecules in the above equation.

The term stoichiometry is also often used for the molar proportions of elements in stoichiometric compounds (composition stoichiometry). For example, the stoichiometry of hydrogen and oxygen in $\mathrm{H_2O}$ is 2:1. In stoichiometric compounds, the molar proportions are whole numbers.

Stoichiometry is not only used to balance chemical equations but also used in conversions, i.e., converting from grams to moles, or from grams to millilitres. For example, to find the number of moles in 2.00 g of NaCl, one would do the following:

$\frac{2.00 \mbox{ g NaCl}}{58.44 \mbox{ g NaCl mol}^{-1}} = 0.034 \ \text{mol}$

In the above example, when written out in fraction form, the units of grams form a multiplicative identity, which is equivalent to one (g/g=1), with the resulting amount of moles (the unit that was needed), is shown in the following equation,

$\left(\frac{2.00 \mbox{ g NaCl}}{1}\right)\left(\frac{1 \mbox{ mol NaCl}}{58.44 \mbox{ g NaCl}}\right) = 0.034\ \text{mol}$

Stoichiometry is also used to find the right amount of reactants to use in a chemical reaction (stoichiometric amounts). An example is shown below using the thermite reaction,

$\mathrm{Fe_2O_3 %2B 2Al \rightarrow Al_2O_3 %2B 2Fe}$

This equation shows that 1 mole of aluminium oxide and 2 moles of iron will be produced with 1 mole of iron(III) oxide and 2 moles of aluminium. So, to completely react with 85.0 g of iron(III) oxide (0.532 mol), 28.7 g (1.06 mol) of aluminium are needed.

$m_\mathrm{Al} = \left(\frac{85.0 \mbox{ g }\mathrm{Fe_2O_3}}{1}\right)\left(\frac{1 \mbox{ mol }\mathrm{Fe_2 O_3}}{159.7 \mbox{ g }\mathrm{Fe_2 O_3}}\right)\left(\frac{2 \mbox{ mol Al}}{1 \mbox{ mol }\mathrm{Fe_2 O_3}}\right)\left(\frac{27.0 \mbox{ g Al}}{1 \mbox{ mol Al}}\right) = 28.7 \mbox{ g}$

Different stoichiometries in competing reactions

Often, more than one reaction is possible given the same starting materials. The reactions may differ in their stoichiometry. For example, the methylation of benzene ( $\mathrm{C_6H_6}$ ), through a Friedel-Crafts reaction using $\mathrm{AlCl_3}$ as catalyst, may produce singly methylated $(\mathrm{C_6H_5CH_3})$ , doubly methylated $(\mathrm{C_6H_4(CH_3)_2})$ , or still more highly methylated $(\mathrm{C_6H}_{6-n}(\mathrm{CH_3})_n)$ products, as shown in the following example,

$\mathrm{C_6H_6 %2B \quad CH_3Cl \rightarrow C_6H_5CH_3 %2B HCl}\,$

$\mathrm{C_6H_6 %2B \,2\ CH_3Cl \rightarrow C_6H_4(CH_3)_2 %2B 2HCl}\,$

$\mathrm{C_6H_6} %2B \,n\ \mathrm{CH_3Cl} \rightarrow \mathrm{C_6H}_{6-n}(\mathrm{CH_3})_n %2B n\,\mathrm{HCl}\,$

In this example, which reaction takes place is controlled in part by the relative concentrations of the reactants.

Stoichiometric coefficient

In layman's terms, the stoichiometric coefficient (or stoichiometric number in the IUPAC nomenclature^[1]) of any given component is the number of molecules which participate in the reaction as written.
For example, in the reaction CH₄ + 2 O₂ → CO₂ + 2 H₂O, the stoichiometric coefficient of CH₄ would be 1 and the stoichiometric coefficient of O₂ would be 2.

In more technically-precise terms, the stoichiometric coefficient in a chemical reaction system of the i–th component is defined as

$\nu_i = \frac{dN_i}{d\xi} \,$

$dN_i = \nu_i d\xi \,$

where N_i is the number of molecules of i, and ξ is the progress variable or extent of reaction (Prigogine & Defay, p. 18; Prigogine, pp. 4–7; Guggenheim, p. 37 & 62).

The extent of reaction ξ can be regarded as a real (or hypothetical) product, one molecule of which is produced each time the reaction event occurs. It is the extensive quantity describing the progress of a chemical reaction equal to the number of chemical transformations, as indicated by the reaction equation on a molecular scale, divided by the Avogadro constant (it is essentially the amount of chemical transformations). The change in the extent of reaction is given by dξ = dn_B/n_B, where n_B is the stoichiometric number of any reaction entity B (reactant or product) an dn_B is the corresponding amount.^[2]

The stoichiometric coefficient ν_i represents the degree to which a chemical species participates in a reaction. The convention is to assign negative coefficients to reactants (which are consumed) and positive ones to products. However, any reaction may be viewed as "going" in the reverse direction, and all the coefficients then change sign (as does the free energy). Whether a reaction actually will go in the arbitrarily-selected forward direction or not depends on the amounts of the substances present at any given time, which determines the kinetics and thermodynamics, i.e., whether equilibrium lies to the right or the left.

If one contemplates actual reaction mechanisms, stoichiometric coefficients will always be integers, since elementary reactions always involve whole molecules. If one uses a composite representation of an "overall" reaction, some may be rational fractions. There are often chemical species present that do not participate in a reaction; their stoichiometric coefficients are therefore zero. Any chemical species that is regenerated, such as a catalyst, also has a stoichiometric coefficient of zero.

The simplest possible case is an isomerism

$A \iff B$

in which ν_B = 1 since one molecule of B is produced each time the reaction occurs, while ν_A = −1 since one molecule of A is necessarily consumed. In any chemical reaction, not only is the total mass conserved but also the numbers of atoms of each kind are conserved, and this imposes corresponding constraints on possible values for the stoichiometric coefficients.

There are usually multiple reactions proceeding simultaneously in any natural reaction system, including those in biology. Since any chemical component can participate in several reactions simultaneously, the stoichiometric coefficient of the i–th component in the k–th reaction is defined as

$\nu_{ik} = \frac{\partial N_i}{\partial \xi_k} \,$

so that the total (differential) change in the amount of the i–th component is

$dN_i = \sum_k \nu_{ik} d\xi_k \,$ .

Extents of reaction provide the clearest and most explicit way of representing compositional change, although they are not yet widely used.

With complex reaction systems, it is often useful to consider both the representation of a reaction system in terms of the amounts of the chemicals present { N_i } (state variables), and the representation in terms of the actual compositional degrees of freedom, as expressed by the extents of reaction { ξ_k }. The transformation from a vector expressing the extents to a vector expressing the amounts uses a rectangular matrix whose elements are the stoichiometric coefficients [ ν_i k ].

The maximum and minimum for any ξ_k occur whenever the first of the reactants is depleted for the forward reaction; or the first of the "products" is depleted if the reaction as viewed as being pushed in the reverse direction. This is a purely kinematic restriction on the reaction simplex, a hyperplane in composition space, or N‑space, whose dimensionality equals the number of linearly-independent chemical reactions. This is necessarily less than the number of chemical components, since each reaction manifests a relation between at least two chemicals. The accessible region of the hyperplane depends on the amounts of each chemical species actually present, a contingent fact. Different such amounts can even generate different hyperplanes, all of which share the same algebraic stoichiometry.

In accord with the principles of chemical kinetics and thermodynamic equilibrium, every chemical reaction is reversible, at least to some degree, so that each equilibrium point must be an interior point of the simplex. As a consequence, extrema for the ξ's will not occur unless an experimental system is prepared with zero initial amounts of some products.

The number of physically-independent reactions can be even greater than the number of chemical components, and depends on the various reaction mechanisms. For example, there may be two (or more) reaction paths for the isomerism above. The reaction may occur by itself, but faster and with different intermediates, in the presence of a catalyst.

The (dimensionless) "units" may be taken to be molecules or moles. Moles are most commonly used, but it is more suggestive to picture incremental chemical reactions in terms of molecules. The N's and ξ's are reduced to molar units by dividing by Avogadro's number. While dimensional mass units may be used, the comments about integers are then no longer applicable.

Stoichiometry matrix

In complex reactions, stoichiometries are often represented in a more compact form called the stoichiometry matrix. The stoichiometry matrix is denoted by the symbol, $\mathbf{N}$ .

If a reaction network has $\mathit{n}$ reactions and $\mathit{m}$ participating molecular species then the stoichiometry matrix will have corresponding $\mathit{m}$ rows and $\mathit{n}$ columns.

For example, consider the system of reactions shown below:

S₁ → S₂

5S₃ + S₂ → 4S₃ + 2S₂

S₃ → S₄

S₄ → S₅.

This systems comprises four reactions and five different molecular species. The stoichiometry matrix for this system can be written as:

$\mathbf{N} = \begin{bmatrix} -1 & 0 & 0 & 0 \\ 1 & 1 & 0 & 0 \\ 0 & -1 & -1 & 0 \\ 0 & 0 & 1 & -1 \\ 0 & 0 & 0 & 1 \\ \end{bmatrix}$

where the rows correspond to S₁, S₂, S₃, S₄ and S₅, respectively. Note that the process of converting a reaction scheme into a stoichiometry matrix can be a lossy transformation, for example, the stoichiometries in the second reaction simplify when included in the matrix. This means that it is not always possible to recover the original reaction scheme from a stoichiometry matrix.

Often the stoichiometry matrix is combined with the rate vector, v to form a compact equation describing the rates of change of the molecular species:

$\frac{d\mathbf{S}}{dt} = \mathbf{N} \cdot \mathbf{v}.$

Gas stoichiometry

Gas stoichiometry is the quantitative relationship (ratio) between reactants and products in a chemical reaction with reactions that produce gases. Gas stoichiometry applies when the gases produced are assumed to be ideal, and the temperature, pressure, and volume of the gases are all known. The ideal gas law is used for these calculations. Often, but not always, the standard temperature and pressure (STP) are taken as 0 °C and 1 bar and used as the conditions for gas stoichiometric calculations.

Gas stoichiometry calculations solve for the unknown volume or mass of a gaseous product or reactant. For example, if we wanted to calculate the volume of gaseous NO₂ produced from the combustion of 100 g of NH₃, by the reaction:

4NH₃ (g) + 7O₂ (g) → 4NO₂ (g) + 6H₂O (l)

we would carry out the following calculations:

$100 \ \mbox{g}\,NH_3 \cdot \frac{1 \ \mbox{mol}\,NH_3}{17.034 \ \mbox{g}\,NH_3} = 5.871 \ \mbox{mol}\,NH_3\$

There is a 1:1 molar ratio of NH₃ to NO₂ in the above balanced combustion reaction, so 5.871 mol of NO₂ will be formed. We will employ the ideal gas law to solve for the volume at 0 °C (273.15 K) and 1 atmosphere using the gas law constant of R = 0.08206 L · atm · K⁻¹ · mol⁻¹ :

$PV$	$= nRT$
$V$	$= \frac{nRT}{P} = \frac{5.871 \cdot 0.08206 \cdot 273.15}{1} = 131.597 \ \mbox{L}\,NO_2$

Gas stoichiometry often involves having to know the molar mass of a gas, given the density of that gas. The ideal gas law can be re-arranged to obtain a relation between the density and the molar mass of an ideal gas:

$\rho = \frac{m}{V}$ and $n = \frac{m}{M}$

and thus:

$\rho = \frac {M P}{R\,T}$

where:
$P$	= absolute gas pressure
$V$	= gas volume
$n$	= number of moles
$R$	= universal ideal gas law constant
$T$	= absolute gas temperature
$\rho$	= gas density at $T$ and $P$
$m$	= mass of gas
$M$	= molar mass of gas

Stoichiometric air-fuel ratios of common fuels

See also: Air–fuel ratio and Combustion

Fuel	By mass ^[3]	By volume ^[4]	Percent fuel by mass
Gasoline	14.6 : 1	—	6.8%
Natural gas	14.5 : 1	9.7 : 1	5.8%
Propane (LP)	15.67 : 1	23.9 : 1	6.45%
Ethanol	9 : 1	—	11.1%
Methanol	6.47 : 1	—	15.6%
Hydrogen	34.3 : 1	2.39 : 1	2.9%
Diesel	14.5 : 1	0.094 : 1	6.8%

Gasoline engines can run at stoichiometric air-to-fuel ratio, because gasoline is quite volatile and is mixed (sprayed or carburetted) with the air prior to ignition. Diesel engines, in contrast, run lean, with more air available than simple stoichiometry would require. Diesel fuel is less volatile and is effectively burned as it is injected, leaving less time for evaporation and mixing. Thus, it would form soot (black smoke) at stoichiometric ratio.

References

^ IUPAC. Compendium of Chemical Terminology, 2nd ed. (the "Gold Book"). Compiled by A. D. McNaught and A. Wilkinson. Blackwell Scientific Publications, Oxford (1997). XML on-line corrected version: http://goldbook.iupac.org (2006-) created by M. Nic, J. Jirat, B. Kosata; updates compiled by A. Jenkins. ISBN 0-9678550-9-8. doi:10.1351/goldbook. Entry: "stoichiometric number".
^ IUPAC Compendium of Chemical Terminology 2nd Edition (1997)
^ John B. Heywood: "Internal Combustion Engine Fundamentals page 915", 1988
^ North American Mfg. Co.: "North American Combustion Handbook", 1952

Ilya Prigogine & R. Defay, translated by D.H. Everett; Chapter IV (1954). Chemical Thermodynamics. Longmans, Green & Co. Exceptionally clear on the logical foundations as applied to chemistry; includes non-equilibrium thermodynamics.
Ilya Prigogine (1967). Thermodynamics of Irreversible Processes, 3rd ed.. Interscience: John Wiley & Sons. A simple, concise monograph. Library of Congress Catalog No. 67-29540
E.A. Guggenheim (1967). Thermodynamics: An Advanced Treatment for Chemists and Physicists, 5th ed.. North Holland; John Wiley & Sons (Interscience). A remarkably astute treatise. Library of Congress Catalog No. 67-20003
Zumdahl, Steven S. Chemical Principles. Houghton Mifflin, New York, 2005, pp 148–150.
Internal Combustion Engine Fundamentals, John B. Heywood

External links

Engine Combustion primer from the University of Plymouth
Free Stoichiometry Tutorials from Carnegie Mellon's ChemCollective
Stoichiometry Add-In for Microsoft Excel for calculation of molecular weights, reaction coëfficients and stoichiometry.